Introduction

Last year has been an amazing yr for HeadSpin in terms of package updates. In HeadSpin ’ s latest software updates, the introduction of the HS tunnel has be a discovery one, as it helps firmly connect HeadSpin devices to local or stage environments for the organization, teams, or individual users. This blog will aid you understand HeadSpin ’ s latest feature, HS tunnel, and how to use it easily without any complications.

What is HS burrow?

HS tunnel is a proprietary tool that is developed by HeadSpin to connect the cloud devices to your local machine to gain access to any local environs or still to get Charles placeholder connected. It is a very diverse tool that can be seamlessly used by go very few commands in your pole.

Prerequisite

Pro tip: Tools like SUSA can handle this autonomously — upload your app and get results without writing a single test script.

The first thing to do is to install the HS CLI tool that is available on the Platform. It is available for MAC, Linux, and Windows. The steps to download the tool are below.
Get the late version of the HS tunnel instal by follow the steps below:

1) Click on your gens and Org name, which are on the top rightfield of the UI.

2) Select & quot; Settings. & quot;

3) Go to the bottom, and you can see the link to download the CLI creature. Download the tool for your respective machine and install the tool.

4) To assure if you receive the latest CLI installed, type & quot; hs -V & quot; in your end.

Once you feature installed the CLI tool, you are all set to run the HS tunnel.

5) Make sure the api waiter is configured properly. If you have an authorisation fault, try running the command below:

hs config waiter https: //api-dev.headspin.io

How to run:

To run the HS burrow, all you receive to do is follow the instructions below, and that & # x27; s it, easy as that.

How to run HS tunnel:

1. Open the device and navigate toToolstab on an Android device or theOverviewtab on an iOS device.

2. Under & quot; Local Environment Tunnel & quot;, set the rules and weather which creates a command that is workable as a command line.

3. Copy the bidding and run it on your terminal.

4. Verify that the host are connected by correspond the hosts shown in the terminal as above with the one in the UI. Each device will have its hostname listed on the device & # x27; s right side under the column& quot; Hostname & quot;.

The above command will get all the hosts in your story connected to your local machine. Once that is done. Start the device that you would require to connect to your local environment and click on the seizure button.

When you click on the capture button, you get two options: “ With Network ” and “ Without Network. ” Select “ With Network, ” and your twist will be connected to your local environment.

Now when you ascertain your public IP in the cloud device, it should show the IP of your home/office network.

4 Parts

Connet Now